Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi aman yang kami sarankan.
Vacon 100 Series AC Inverter for 4kW (5HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 18A at high overload, or 5.5kW (7.5Hp) to 24A when Fan/Pump rated. Converts fixed frequency three phase 230V input to variable frequency three phase 230V to control the speed of a standard AC Induction motor or permanent magnet synchronous motor.
Size MR5: 144mm Wide x 214mm Deep x 419mm High. IP54/NEMA Type 12
Weight: 10kg.
Overload: 150% x 60 seconds every 10 minutes, 200% x 2 seconds every 20 seconds
Speed Control Range: 0-320Hz.
Braking: Minimum 41 Ohm external resistor (not supplied)
Graphical keypad.
2 x Analogue Inputs, 6 x Digital Inputs, 1 x Analogue Output, 2 x Relay Contact set, RS485.
Input Current: [as output current]
Input Voltage: 208-240V-10% +10% Three Phase at 50/60Hz ±10%
EMC Filters: IEC EN61800-3 Category C2 1st Environment (Industrial and Domestic).
Wall mount.
Rated 40°C Ambient.
Ventilation space in above: 120mm
Ventilation space below: 60mm
Ventilation space at sides: 20mm
Heat Loss at max output: [not specified]
Mounting via 4 x 7mm diameter holes at rear on 115mm x 406mm centres.
Manufacturer part number is VACON0100-3L-0024-2+IP54
Vacon 100 replaces NXS Series.
Prices may change at any time, please confirm again
PT. Central Invertech
Office:
Cempaka Arum Blok A5 No. 1A-1B Gedebage
Bandung Jawa Barat, Indonesia 40294
Phone : +62 227831830
Fax : +62 227832735
Email : [email protected]
Website : http://www.inverter.co.id
